1
replacement option found
Existing pump - Borehole
Brand
Grundfos
Product name
SQE 2-70
Mains connection
1x230 V
Pipe Connection
Rp 32
Nominal power P2
1,15 kW
Replacement pump - Standard Exchange sheet
Product name
Actun INITIAL 3.03-21 B/P 1.7
Item no.
9234256
Mains connection
1x230 V
Pipe Connection
Rp 32
Rated Current
5,4 A
Nominal power P2
0,75 kW
Comment
Corresponding connection dimension.
Replacement pumps have lower pressures at low flow but provide a higher flow.
Replacement pump is not equipped with frequency converter.
Product information
Actun INITIAL 3.03-21 B/P 1.7
Actun INITIAL 3.03-21 B/P 1.7
Item no.
: 9234256
Construction
Multistage 3" submersible pump for vertical installation
Area of application
Submersible-motor pump for vertical installation
Hydraulics
Multistage submersible-motor pump with radial impellers with sectional construction and integrated non-return valve. All parts in contact with the fluid are made of corrosion-free materials.
Motor
Corrosion-free, oil-filled single-phase motor for direct starting, with self-lubricating bearing.
Cooling
The motor is cooled by the fluid. The motor must always be operated in submerged state. The limit values for the max. fluid temperature and the minimum flow rate must not be exceeded. Only vertical installation is possible.
Scope of delivery
Multistage 3" submersible pump for vertical installation
Area of application
- Supplying water from bore holes, wells and cisterns
- Sprinkling and irrigation
- Pumping water without long-fiber and abrasive materials
- Multistage submersible-motor pump with radial impellers
- Integrated non-return valve
- NEMA coupling
- Single-phase motor
- Integrated thermal motor protection
- Mains connection: 220V-230V（±10% ）50Hz or 60Hz
- Immersed operating mode: S1
- Fluid temperature: 3 -35 °C
- Minimum flow rate at motor: 0.2 m/s
- Max. sand content: 150 g/m3, maximum particle diameter ≤0.2mm
- Max. immersion depth: 150 m
- Protection class of the pump: IP 68
- Protection class of the start box: IP44
- Pressure connection: G1 1/4”
- Hydraulic housing: AISI304
- Diffusor: polycarbonate (PC)
- Impellers: polyoxymethylene (POM)
- Hydraulics shaft: AISI304
- Motor housing: AISI304
- Motor shaft: AISI304
Submersible-motor pump for vertical installation
Hydraulics
Multistage submersible-motor pump with radial impellers with sectional construction and integrated non-return valve. All parts in contact with the fluid are made of corrosion-free materials.
Motor
Corrosion-free, oil-filled single-phase motor for direct starting, with self-lubricating bearing.
Cooling
The motor is cooled by the fluid. The motor must always be operated in submerged state. The limit values for the max. fluid temperature and the minimum flow rate must not be exceeded. Only vertical installation is possible.
Scope of delivery
- Pump
- Connection cable length according to the scope of the order
- Single-phase versions including start box with capacitor, thermal motor protection and On/Off switch or with build-in capacitor in the motor
- Shrinkable tubes according to the scope of the order
- Installation and operating instructions
