Existing pump - Circulation
Replacement pump - High Efficiency Premium Exchange sheet
Comment
Product information
Stratos PICO-Z 30/0,5-6 -180
![](/storage/3323/stratos-pico-z-2023-200x180.png)
Design
Glandless circulator with screwed connection, blocking-current proof EC motor and integrated electronic power control.
Application
Domestic hot water circulation systems in the industry and building services.
Equipment/function
Operating modes:
- T-const. for temperature-controlled mode
- Δ p-c for constant differential pressure
- Constant speed (n-const.)
- Setting the operating mode
- Setting of pump output (delivery head)
- Setting the minimum temperature
- Setting the minimum flow rate
- Pump venting
- Manual restart
- Reset function for resetting the electricity meter
- Reset function for resetting to factory settings
- Key lock for disabling the settings
- Continuous power adjustment according to the operating mode
- Temperature control for maintaining a constant return temperature in the domestic hot water circulation system
- Thermal disinfection routine (detecting and supporting the thermal disinfection of the domestic hot water storage tank)
- Automatic venting function
- Automatic restart
Alternating display:
- Current volume flow [m³/h]
- Current delivery head H in [m]
- Current speed (n) [rpm]
- Power consumption P [W]
- Energy consumption W [kWh]
-
Current temperature T [°C]
- Display status for warning messages (yellow display) and error messages (red display) each with error code and description in plain text
- Display status for process display (blue display):
- Pump venting
- Manual restart
- Status LED:
- Green LED: Proper operation
- Blue LED: Pump communication with external module
- Wrench attachment point on pump body
- Quick electrical connection with Wilo-Connector
- Blocking-current proof motor
- Particle filter
- Thermal insulation as standard
- Wilo-Connectivity interface for external modules
- Fluid temperature +2 °C to +95 °C
- Mains connection 1~230 V, 50 Hz
- Protection class IPX4D
- Screwed connection G1¼, G1½, G2
- Max. operating pressure 10 bar
- Pump housing: Stainless steel
- Thermal insulation: Polypropylene
- Impeller: Plastic
- Shaft: Oxide ceramic
- Bearing: Carbon, synthetic resin-impregnated
- Pump
- Thermal insulation
- Wilo-Connector
- Gaskets
- Installation and operating instructions
![](/storage/1073/kontakt-rak-200x180.png)
- Fits PICO pumps and Star-Z NOVA.
![](/storage/2370/kontakt-vinklad-1-200x180.png)
- Fits PICO pumps and Star-Z NOVA.
- Comes with cable.
![](/storage/1074/kontakt-vinklad-200x180.png)
- WS8 connector.
- Cable length 2 meters.
![](/storage/3177/smart-connect-modul-pico-200x180.png)
![](/storage/3365/connect-modul-bms-200x180.png)
interface for building management systems (BMS).
The module is mounted on the electronic module via the Wilo-Connectivity interface of the pump
Equipment/function
- Run signal display
- Analogue input 0 -10 V for setpoint specification
- Run signal display via relay output as changeover contact
- SSM collective fault signal as potential-free NC contact
- SBM collective run signal as potential-free NO contact
-
Control input with configurable functions:
- Override OFF (External OFF), MIN (External MIN), MAX (External MAX)
- 2 PG screwed connections, rotatable with vertical or horizontal orientation
![](/storage/3347/kap-stratos-pico-z-2023-200x200.png)
![](/storage/2713/kopplingsschema-pico-200x200.png)