1 replacement option found

Existing pump - Circulation

Brand IMP
Product name NMT SAN PLUS 25/80-130
Overall length 130 mm
Mains connection 1x230 V
Pipe Connection G 40

Replacement pump - High Efficiency Standard Exchange sheet

Product name Yonos MAXO-Z 25/0,5-7
Item no. 2175538
Overall length 180 mm
Mains connection 1x230 V
Pipe Connection G 40
Rated Current 0,08-1,0 A
Nominal power P2 0,09 kW
Fluid temperature range 0 - +80 °C

Comment

**NOTE** Modification of piping.
Replacement pump has higher capacity.
This Pump is equipped with alarm output (SSM) as standard. Additonal functions (external on/off, external operation indication) can be added with the simple install of the Connect-Module. One Connect-Module would be required per pump head.

Product information
Yonos MAXO-Z 25/0,5-7

Yonos MAXO-Z 25/0,5-7
Item no. : 2175538

Your advantages
  • High drinking water hygiene ensured through collective fault signal
  • Energy-saving due to high-efficiency hydraulics and synchronous motor
  • Complete transparency of the delivery head, speed and possible faults thanks to its LED display
  • Simple adjustment over three speed stages using the green Knob when replacing an uncontrolled standard pump
  • Easier electrical connection thanks to the Wilo-Plug
  • Compact design and proven user-friendliness
The most efficient solution for domestic hot water circulation in larger buildings.

The Wilo-Yonos MAXO-Z is an efficient circulator for the hygienically safe provision of domestic hot water in commercial buildings. Thanks to its LED display, it gives you complete transparency regarding the delivery head, speed stage or any possible faults. The compact construction and Wilo plug for the electrical connection simplifies the installation. The Green Button makes pump operation simple.

Construction
Glandless circulator with threaded connection or flange connection, EC motor with automatic power adjustment.

Application
Domestic hot water circulation systems in industry and building services.

Equipment/function
Operating modes:
  • Δp-c for constant differential pressure
  • Δp-v for variable differential pressure
  • n = constant (3 speed stages)
Manual functions
  • Setting the operating mode
  • Setting of pump output (delivery head)
  • Setting the speed stages
Automatic functions
  • Infinitely variable power adjustment according to the operating mode
  • Deblocking function
  • Soft start
  • Integrated full motor protection
Signal and display functions
  • Collective fault signal (potential-free NC contact)
  • Fault signal light
  • LED segment display for displaying the delivery head and error codes
  • Display of the configured speed stage (C1, C2 or C3)
Equipment
  • Wrench attachment point on pump body (for threaded pipe union pumps)
  • Quick electrical connection with Wilo plug. For the connection of the mains and SSM lines, with integrated strain relief
  • For flange-end pumps: Flange versions
  • Standard version for DN 40 to DN 65 pumps: Combination flange PN 6/10 for counter flanges PN 6 and PN 10
Scope of delivery
  • Pump
  • Including gaskets for threaded connection
  • Incl. washers for flange screws (for nominal connection diameters DN 40 - DN 65)
  • Including installation and operating instructions
Technical data
  • Permissible temperature range drinking water up to 3.57 mmol/l (20 °dH): 0 °C to +80 °C
  • Mains connection 1~230 V, 50/60 Hz
  • Protection class IPX4D
  • Screwed connection or flange connection (depending on type) Rp 1 to DN 65
  • Max. operating pressure of standard version: 6/10 bar or 6 bar (special version: 10 bar)
Materials
  • Pump housing made of red brass
  • Shaft: Stainless steel
  • Bearing: Carbon, synthetic resin-impregnated
  • Impeller: Plastic
Connect-Module Yonos MAXO
Item no.: 2210108

The Wilo-Connect module Yonos MAXO is a retrofittable plug-in module for Wilo-Yonos MAXO/Yonos MAXO-D/Yonos MAXO-Z pumps.
The Wilo-Connect module Yonos MAXO is installed on the electronic module of the pump at the position of the Wilo plug.

Utilisation of the Wilo-Connect moduleYonos MAXO dispenses with external contactors and other switchgears as well as the associated installation workload. The load of customer-side switchgears (relays) due to high starting currents is reduced to a minimum by the Connect module Yonos MAXO.

Equipment/function
  • Run signal display
  • SSM collective fault signal as potential-free NC contact
  • SBM collective run signal as potential-free NO contact
  • Overriding Off control input (External Off)
  • Integrated dual pump management with the functions:
  • Main/standby operation with runtime-dependent (24 h) switchover from main to standby pump
  • Fault-sensitive switchover to operational standby pump