Existing pump - Circulation
                    Replacement pump - High Efficiency Premium Exchange sheet
Comment
                Product information
                
                Stratos PICO-Z 20/0,5-4 -150
                
            
        
                                                                    Design
Glandless circulator with screwed connection, blocking-current proof EC motor and integrated electronic power control.
Application
Domestic hot water circulation systems in the industry and building services.
Equipment/function
Operating modes:
- T-const. for temperature-controlled mode
 - Δ p-c for constant differential pressure
 - Constant speed (n-const.)
 
- Setting the operating mode
 - Setting of pump output (delivery head)
 - Setting the minimum temperature
 - Setting the minimum flow rate
 - Pump venting
 - Manual restart
 - Reset function for resetting the electricity meter
 - Reset function for resetting to factory settings
 - Key lock for disabling the settings
 
- Continuous power adjustment according to the operating mode
 - Temperature control for maintaining a constant return temperature in the domestic hot water circulation system
 - Thermal disinfection routine (detecting and supporting the thermal disinfection of the domestic hot water storage tank)
 - Automatic venting function
 - Automatic restart
 
Alternating display:
- Current volume flow [m³/h]
 - Current delivery head H in [m]
 - Current speed (n) [rpm]
 - Power consumption P [W]
 - Energy consumption W [kWh]
 - 
Current temperature T [°C]
 - Display status for warning messages (yellow display) and error messages (red display) each with error code and description in plain text
 - Display status for process display (blue display):
 - Pump venting
 - Manual restart
 - Status LED:
 - Green LED: Proper operation
 - Blue LED: Pump communication with external module
 
- Wrench attachment point on pump body
 - Quick electrical connection with Wilo-Connector
 - Blocking-current proof motor
 - Particle filter
 - Thermal insulation as standard
 - Wilo-Connectivity interface for external modules
 
- Fluid temperature +2 °C to +95 °C
 - Mains connection 1~230 V, 50 Hz
 - Protection class IPX4D
 - Screwed connection G1¼, G1½, G2
 - Max. operating pressure 10 bar
 
- Pump housing: Stainless steel
 - Thermal insulation: Polypropylene
 - Impeller: Plastic
 - Shaft: Oxide ceramic
 - Bearing: Carbon, synthetic resin-impregnated
 
- Pump
 - Thermal insulation
 - Wilo-Connector
 - Gaskets
 - Installation and operating instructions
 
                                                            - Fits PICO pumps and Star-Z NOVA.
 
                                                            - Fits PICO pumps and Star-Z NOVA.
 - Comes with cable.
 
                                                            - WS8 connector.
 - Cable length 2 meters.
 
                                                            
                                                            interface for building management systems (BMS).
The module is mounted on the electronic module via the Wilo-Connectivity interface of the pump
Equipment/function
- Run signal display
 - Analogue input 0 -10 V for setpoint specification
 - Run signal display via relay output as changeover contact
 - SSM collective fault signal as potential-free NC contact
 - SBM collective run signal as potential-free NO contact
 - 
Control input with configurable functions:
- Override OFF (External OFF), MIN (External MIN), MAX (External MAX)
- 2 PG screwed connections, rotatable with vertical or horizontal orientation