1
replacement option found
Existing pump - Drainage and sewage
Brand
Jung
Product name
COMPLI MC 108/2 ME
Mains connection
1x230 V
Pipe Connection
DN 50/100 - DN 32 (ø40 mm)
Nominal power P2
1,14 kW
Replacement pump Exchange sheet
Product name
DrainLift SANI CUT-M.27M/1
Item no.
6095522
Mains connection
1x230 V
Pipe Connection
DN 100/150 - DN 32 (ø40 mm)
Rated Current
6,8 A
Nominal power P2
1,1 kW
Fluid temperature range
+3 - +40 °C
Comment
Check supply and pressure connection, adjustment of piping may be required.
Check space for new pumping station.
DrainLift SANI CUT-M: Useable volume 29-48 litres
Product information
DrainLift SANI CUT-M.27M/1
DrainLift SANI CUT-M.27M/1
Item no.
: 6095522
Your advantages
- Very easy to install and transport due to space-saving compact construction and very light weight
- Operational reliability provided by the large switching volume, thermal motor protection and mains-independent alarm
- Corrosion-free design with engineering plastics and stainless steel guarantees high reliability
- Freely selectable connections for maximum installation flexibility
- Transparent reservoir cover and cleaning opening in the non-return valve ensure easy maintenance
- Optional Wilo-SmartHome connection for instantaneous notification directly to your mobile phone
The compact Wilo-DrainLift SANI-S single faeces lifting unit is the smallest and lightest lifting unit according to EN 12050-1 (without macerator) and is therefore ideal for use in detached and semi-detached houses. Thanks to its large pump volume, the freely selectable inlets and the optional version for particularly aggressive fluids, the Wilo-DrainLift SANI-S can be used flexibly and is easy to install. Maintenance is made particularly easy by the user-friendly construction. Equipped with an optional wireless alarm transmitter, it can send a push notification to your smartphone in the event of a fault. Space-saving compact design and lowest-possible weight make installation and transport easy
Construction
Compact, ready for connection and fully submersible single pump lifting unit for pumping sewage containing faeces.
Application
Pumping of sewage containing faeces:
- In cases where sewage cannot be led to the sewer system via a natural fall.
- For the backflow resistant drainage in cases where the discharge point is below the backflow level.
- Switchgear with mains-independent alarm and collective fault signal
- Ready-to-plug
- Tank with inspection opening and transparent cover
- Analogue level measurement (4 … 20 mA)
- Non-return valve with inspection opening
- Thermal motor monitoring with bimetallic strip
- Lifting unit with switchgear and connection cable with plug
- Flange connector DN 80/100
- Collar DN 100 for pressure connection
- Collar 50 mm for ventilation connection
- Collar DN 50 for evacuation connection
- Inlet set with hole saw 124 mmand gasket DN 100
- Fixation material
- Insulation mat
- 9 V rechargeable battery
- Operating and maintenance manual
- Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
- Operating mode: S3 10%
- Fluid temperature: 3 ... 40 °C, max. 65 °C for 5 min
- Max. ambient temperature: 40 °C
- Vessel volume: 47 l
- Usable volume with regard to the positive suction head*: 25 l (180 mm*)/32 l (250 mm*)
- Pressure connection: DN 80
- Inlet connection: DN 100/150
- Ventilation connection: 50 mm
- Switchgear degree of protection: IP54
- Lifting unit degree of protection: IP68 (2 mWG/7 d)
- Motor housing: 1.4404
- Hydraulics: PP-GF30
- Impeller: PP-GF30
- Tank: PE
- Non-return valve: PPS
Gas- and watertight collection reservoir with collecting space that slopes at an angle and inspection opening with transparent cover. The inlets are freely configurable, level measurement is performed with an analogue output signal 4…20 mA. Pressure connection with attached non-return valve with inspection opening.
Drive via surface-cooled motor with thermal motor monitoring.
Pre-installed switchgear for automatic operation:
Wilo-Control MS-L
- Collective fault signal with potential-free contact
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
- Operation via display and icon-based, alphanumeric menu
- Collective fault signal with potential-free contact
- Individual fault signal with potential-free contact
- ModBus interface
- Integrated and mains-independent alarm
- Adjustable follow-up time
- 1.5 m connection cable with attached plug
Diaphragm hand pump
Item no.: 2060166
- Made of cast iron gjutjärn
- Dimension Rp 40
Inlet seal set DN 150 (hole saw)
Item no.: 2515145
- Gasket for pipe diameter of 160 mm
- Hose clip
- Hole saw (Ø 175 mm)
Inlet seal set DN 100
Item no.: 2522672
- Gasket for pipe diameter of 110 mm
- Hose clip
Inlet seal set DN 100
Item no.: 6096498
- Gasket for pipe diameter of 110 mm
- Hose clip
Inlet seal set DN 100
Item no.: 6096499
- Gasket for pipe diameter of 110 mm
- Hose clip
PVC gate valve DN 100
Item no.: 2529808
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network.
- Connection input/output ø110 mm
- Made of PVC
PVC gate valve DN 150
Item no.: 2529809
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network.
- Connection input/output ø160 mm
- Made of PVC
SIGNAL HORN 230V AC
Item no.: 501459398
Horn with bell for wall fixation for indoor and outdoor areas. Alarm signal via electromechanical noise generation with steel diaphragm (88 dBA).
MOUNTING LIGHT RED 230 V AC WALL
Item no.: 2551613
Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz
DRAIN ALARM
Item no.: 2545133
Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal.
