1 replacement option found

Existing pump - Drainage and sewage

Brand Flygt, ITT, Lowara, Xylem
Product name KS 2610.160 K 233 MT 3~
Mains connection 3x400 V
Pipe Connection DN 50 / G 50

Replacement pump Exchange sheet

Product name Padus PRO M05/T015-540/P
Item no. 6087512
Mains connection 3x400 V
Pipe Connection DN 50
Nominal power P2 1,5 kW
Fluid temperature range +3 - +30 °C
Free ball passage 10

Comment

Possible modification of installation, replacement pump has compliant connection diameter.
If the existing pump is equipped with a level sensor, the replacement pump in the A version must be selected.

Product information
Padus PRO M05/T015-540/P

Padus PRO M05/T015-540/P
Item no. : 6087512

Your advantages
  • High reliability in abrasive fluids thanks to rubber-coated hydraulics and an impeller made of Duplex chrome steel
  • Easy installation thanks to low weight and flexible pressure connection (vertical/horizontal)
  • Active cooling for reliable continuous operation
  • Continuous duty in slurping operation thanks to passive cooling
  • Easy maintenance thanks to quick access to wearing parts
  • Equipped with energy-efficient IE3 motor technology as standard
  • Highest operational reliability thanks to integrated protection function
The portable submersible pump for reliable and long-term drainage of excavations.
The Wilo-Padus PRO is the ideal submersible drainage pump for the drainage of excavations. Thanks to its robust construction, the wear-resistant material combinations and passive cooling in slurping operation, the submersible drainage pump with IE3 motor and integrated protection function is especially suitable for continuous duty in abrasive fluids. It can be used flexibly thanks to its low weight and flexible pressure connection. Quick access to the most important components also simplifies commissioning and maintenance. The Wilo-Padus PRO also fulfils all digitalisation requirements for the optimal planning of future maintenance work.

Construction
Submersible drainage pump.

Application
Pumping of:
  • Wastewater
  • Process water
Equipment/function
  • IE3 motor
  • A version with float switch and motor protection plug
  • Sheath current cooling
Scope of delivery 
  • Pump with bare cable end
  • Pump with float switch and motor protection plug (A version)
  • Pressure port with Storz pipe coupling
  • Installation and operating instructions
Technical data
  • Mains connection: 3~400 V, 50 Hz
  • Protection class: IP68
  • Max. immersion depth: 20 m
  • Fluid temperature: 3 … 40 °C
  • Cable length: 23 m
  • Pressure port: Size B Storz coupling
Materials
  • Motor housing: EN-AC-AlSi10Mg
  • Cooling shroud: 1.4404
  • Pump housing: EN-AC-AlSi10Mg + NBR-70
  • Impeller: 1.4470
  • Suction strainer: 1.4404
  • Shaft: 1.4404
  • Seal:
  • On motor side: SiC/SiC
  • Fluid side: SiC/SiC
  • Static gaskets: NBR
Description/construction
Submersible drainage pump as submersible monobloc unit for portable dry and wet well installation.

Hydraulics
The outlet on the pressure side is designed as vertical threaded connection with Storz coupling. If necessary, the outlet on the pressure side can be aligned horizontally. Semi-open, multi-channel impellers are used in the process. The inlet has been equipped with a suction strainer. Consequently, coarse elements in the fluid are filtered upstream of the suction port.

Motor
AC and three-phase current version IE3 motors are used in the process. Motors feature thermal motor monitoring. The motor is cooled by the sheath flow cooling. Continuous duty is possible when immersed/non-immersed, also in slurping operation.
A sealing chamber protects the motor from fluid ingress. The filling fluid used is potentially biodegradable and environmentally safe.
Detachable connection cables, the cable is 23 m long and features bare cable ends. The A version is also equipped with a float switch.

Seal
The sealing on the fluid side and on the motor side is performed by two bidirectional mechanical seals.
MOUNTING LIGHT RED 24 V DC
Item no.: 2551612

Xenon flash light for wall fixation for indoor and outdoor areas. Light colour: Red, flash frequency: 0.75 Hz
Wilo-Control MS-Lift 1x4
Item no.: 2539741

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control MS-Lift 2x4
Item no.: 2539745

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control EC-Lift 1x12
Item no.: 2543210

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
Wilo-Control EC-Lift 2x12
Item no.: 2543220

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
DRAIN ALARM
Item no.: 2545133

Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. 
LEVEL SENSOR 0-1MWS, 10M CABLE
Item no.: 2519924

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
LEVEL SENSOR 0-2,5mWS, 10m CABLE
Item no.: 2519921

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
FLOAT SWITCH WA 65 (PSN-O) 5M
Item no.: 503211390

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH WA 65 (PSN-O) 10M +VP
Item no.: 503211893

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH MS 1
Item no.: 2004593

Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF"
Float switch WA KR1 S
Item no.: 6082807

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF