1 replacement option found

Existing pump - Drainage and sewage

Brand KSB
Product name mini-Compacta U 1.100 D
Mains connection 3x400 V
Pipe Connection DN 100 - DN 80/100
Nominal power P2 0,75 kW

Replacement pump Exchange sheet

Product name DrainLift SANI-M.12T/1
Item no. 2549903
Mains connection 3x400 V
Pipe Connection DN 100/150 - DN 80
Rated Current 2,9 A
Nominal power P2 1,1 kW
Fluid temperature range +3 - +40 °C
Free ball passage 44

Comment

Check supply and pressure connection, adjustment of piping may be required.
Corresponding connection dimension on pressure side.

Product information
DrainLift SANI-M.12T/1

DrainLift SANI-M.12T/1
Item no. : 2549903

Your advantages
  • Very easy to install and transport due to compact construction and light weight
  • Operational reliability provided by the large switching volume, thermal motor protection and mains-independent alarm
  • Corrosion-free design with engineering plastics and stainless steel guarantees high reliability
  • Freely selectable connections for maximum installation flexibility
  • Universal use thanks to several variants with two free ball passage sizes (44/65 mm), operating mode for continuous duty or intermittent periodic duty and the version for aggressive fluids
  • Transparent reservoir cover and cleaning opening in the non-return valve ensure easy maintenance
  • Optional Wilo-SmartHome connection for instantaneous notification directly to your mobile phone
The large single pump lifting unit for single and two-family homes.

The Wilo-DrainLift SANI-M single faeces lifting unit is the ideal solution for utilisation in single and two-family homes with uncontrolled sewage intake, thanks to its particularly large pump volume and the selectable endurance run/intermittent periodic duty motor operating modes. With a free ball passage of 44 mm or 65 mm, freely selectable inlets and the optional version for particularly aggressive fluids, it can be used flexibly and is easy to install. Maintenance is made particularly easy by the user-friendly construction. Equipped with an optional wireless alarm transmitter, it can send a push notification to your smartphone in the event of a fault.

Construction
Ready for connection and fully submersible single-pump lifting unit for pumping sewage containing faeces.

Application
Pumping of sewage containing faeces:
  • In cases where sewage cannot be led to the sewer system via a natural fall.
  • For the backflow resistant drainage in cases where the discharge point is below the backflow level.
Equipment/function
  • Switchgear with mains-independent alarm and collective fault signal
  • Ready-to-plug
  • Tank with inspection opening and transparent cover
  • Analogue level measurement (4 … 20 mA)
  • Non-return valve with inspection opening
  • Thermal motor monitoring with bimetallic strip
Scope of delivery
  • Lifting unit with switchgear and connection cable with plug
  • Flange connector DN 80/100
  • Collar DN 100 for pressure connection
  • Collar 75 mm for ventilation connection
  • Collar DN 50 for evacuation connection
  • Inlet set with hole saw 124 mmand gasket DN 100
  • Fixation material
  • Insulation mat
  • 9 V rechargeable battery
  • Operating and maintenance manual
Technical data
  • Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz
  • Operating mode: S3 10%/S1
  • Fluid temperature: 3 ... 40 °C, max. 65 °C for 5 min
  • Max. ambient temperature: 40 °C
  • Vessel volume: 99 l
  • Usable volume with regard to the positive suction head*: 50 l (180 mm*)/63 l (250 mm*)/74 l (315 mm*)
  • Pressure connection: DN 80
  • Inlet connection: DN 100/150
  • Ventilation connection: 75 mm
  • Switchgear degree of protection: IP54
  • Lifting unit degree of protection: IP68 (2 mWG/7 d)
Materials
  • Motor housing: 1.4404
  • Hydraulics: PP-GF30
  • Impeller: PP-GF30 or 1.4408
  • Tank: PE
  • Non-return valve: PPS
Description/construction
Gas- and watertight collection reservoir with collecting space that slopes at an angle and inspection opening with transparent cover. The inlets are freely configurable, level measurement is performed with an analogue output signal 4…20 mA. Pressure connection with attached non-return valve with inspection opening.

Drive via a surface-cooling or self-cooling motor with thermal motor monitoring.

Pre-installed switchgear for automatic operation:

Wilo-Control MS-L
  • Collective fault signal with potential-free contact
  • Integrated and mains-independent alarm
  • Adjustable follow-up time
  • 1.5 m connection cable with attached plug
Wilo-Control EC-L
  • Operation via display and icon-based, alphanumeric menu
  • Collective fault signal with potential-free contact
  • Individual fault signal with potential-free contact
  • ModBus interface
  • Integrated and mains-independent alarm
  • Adjustable follow-up time
  • 1.5 m connection cable with attached plug
Diaphragm hand pump
Item no.: 2060166
Diaphragm hand pump for manual draining of a collection reservoir. Fixed installation and mobile application possible. The pumped-off fluid must flow directly to the discharge pipe or another collection point.
  • Made of cast iron gjutjärn
  • Dimension Rp 40
Inlet seal set DN 100 (hole saw)
Item no.: 2521841
Inlet set for connection of DN 100 inlets for lifting units or pump chambers with freely selectable inlet surfaces:
  • Gasket for pipe diameter of 110 mm
  • Hose clip
  • Hole saw (Ø 124 mm)
Inlet seal set DN 150 (hole saw)
Item no.: 2515145
Inlet set for connection of DN 150 inlets for lifting units or pump chambers with freely selectable inlet surfaces:
  • Gasket for pipe diameter of 160 mm
  • Hose clip
  • Hole saw (Ø 175 mm)
Inlet seal set DN 200 (hole saw)
Item no.: 2552851
Inlet set for connection of DN 200 inlets for lifting units or pump chambers with freely selectable inlet surfaces:
  • Gasket for pipe diameter of 200 mm
  • Hose clip
  • Hole saw (Ø 215 mm)
Inlet seal set DN 100
Item no.: 2522672
Inlet set for connection of DN 100 inlets for lifting units or pump chambers with freely selectable inlet surfaces:
  • Gasket for pipe diameter of 110 mm
  • Hose clip
Inlet seal set DN 150
Item no.: 2552849
Inlet set for connection of DN 150 inlets for lifting units or pump chambers with freely selectable inlet surfaces:
  • Gasket for pipe diameter of 160 mm
  • Hose clip
Inlet seal set DN 200
Item no.: 2552850
Inlet set for connection of DN 200 inlets for lifting units or pump chambers with freely selectable inlet surfaces:
  • Gasket for pipe diameter of 200 mm
  • Hose clip
GATE VALVE DN100 PN10 GG25 CPL.
Item no.: 2017163
Stop Valve:
  • Intended for pumps in the Rexa series.
  • Connection DN 100 PN10.
GATE VALVE DN80 PN10 GG25 CPL.
Item no.: 2017162
Stop Valve:
  • Intended for pumps in the Rexa series.
  • Connection DN 80 PN10.
PVC gate valve DN 100
Item no.: 2529808
Gate Valve:
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network.
  • Connection input/output ø110 mm
  • Made of PVC
PVC gate valve DN 150
Item no.: 2529809
Gate Valve:
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network.
  • Connection input/output ø160 mm
  • Made of PVC
PVC gate valve DN 200
Item no.: 2552848
Gate Valve:
Gate valve with plate element and fixed HT/KG-flange connections for shutting off the pipe network.
  • Connection input/output ø200 mm
  • Made of PVC