1 replacement option found

Existing pump - Drainage and sewage

Brand Flygt, ITT, Lowara, Xylem
Product name SXV 3
Mains connection 3x400 V
Pipe Connection G 32
Nominal power P2 0,55 kW

Replacement pump Exchange sheet

Product name TSW 32/8 A
Item no. 6045167
Mains connection 1x230 V
Pipe Connection Rp 32
Rated Current 2,2 A
Nominal power P2 0,3 kW
Fluid temperature range +3 - +35 °C
Free ball passage 10

Comment

Possible modification of installation, replacement pump has compliant connection diameter.
**NOTE** 1~.

Product information
TSW 32/8 A

TSW 32/8 A
Item no. : 6045167

Your advantages
  • User-friendly – lightweight, ready-to-plug version (Plug&Pump)
  • Perfect for mobile applications – features a robust, impact-resistant stainless steel housing
  • Reliable operation – stainless steel-encapsulated motor with sheath flow cooling, mechanical seal and sealing chamber
Construction
Submersible drainage pump

Application
Pumping of:
  • Sewage without faeces or long-fibre constituents
  • Wastewater
Equipment/function
  • Connection cable with plug
  • Float switch
  • Self-switching thermal motor monitoring
  • Sheath current cooling
Scope of delivery
  • Pump with connection cable and plug
  • Attached float switch
  • Non-return valve, supplied
  • Hose connection, enclosed
  • Installation and operating instructions
Technical data
  • Mains connection 1~ 230 V, 50 Hz
  • Protection class: IP68
  • Max. immersion depth: 7 m
  • Fluid temperature: 3 ... 35 °C, briefly up to 3 min.: max. 90 °C
  • Pressure port: Rp 1¼
Materials
  • Motor housing: 1.4301 (AISI 304)
  • Pump housing: 1.4301 (AISI 304)
  • Impeller: SPL
  • Shaft: 1.4401 (AISI 316)
  • Seal:
  • On motor side: NBR
  • Fluid side: Carbon/ceramic
Description/construction
Submersible pump for stationary and portable wet-well installation in fully automatic mode with attached float switch.

Hydraulics
The pumps are equipped with an open multi-channel impeller and have a 10 mm free ball passage. The pressure connection is a vertical threaded connection.

Motor
Single-phase AC motor with integrated operating capacitor. The motor heat is transferred directly to the fluid via the motor housing.

The motor is equipped with automatically switching thermal motor monitoring. This means that the motor is switched off if it overheats and is automatically switched on again once it has cooled down.

Seal
The seal is created on the fluid side by a mechanical seal, and on the motor side by a rotary shaft seal. A sealing chamber with a white-oil filling is located between the gaskets.

Cable
The pump is equipped with a 10 m connection cable with a shockproof plug and an attached float switch.

Versions
  • Drain TSW with twister function – The twister function guarantees constant turbulence in the pump's suction area. This prevents sediment from settling, This results in a clean pump sump and reduces the build-up of odours
Wilo-Control MS-Lift 1x4
Item no.: 2539741

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control MS-Lift 2x4
Item no.: 2539745

Microprocessor-controlled switchgear for level-dependent control of a submersible pump with float switch for level measurement. The parametrization is carried out using dip switches and potentiometers.
Wilo-Control EC-Lift 1x12
Item no.: 2543210

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
Wilo-Control EC-Lift 2x12
Item no.: 2543220

Microcontroller-controlled switchgear for level-dependent control of a submersible pump with analogue or digital signal transmitters. Individual parameters are entered via symbol-based menu navigation and an operating button.
DRAIN ALARM
Item no.: 2545133

Network-independent alarm switchgear (self-charging power supply unit) for wall fixation with optical and acoustic alarm signal. 
LEVEL SENSOR 0-1MWS, 10M CABLE
Item no.: 2519924

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
LEVEL SENSOR 0-2,5mWS, 10m CABLE
Item no.: 2519921

Level sensor with ATEX approval for level control in sewage water containing faeces. A level sensor is used here to measure the hydrostatic pressure in the medium and to convert it directly in the pressure transducer into an electrical signal by means of a diaphragm. The signal is transmitted to the switchgear and evaluated accordingly.
FLOAT SWITCH WA 65 (PSN-O) 5M
Item no.: 503211390

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH WA 65 (PSN-O) 10M +VP
Item no.: 503211893

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF
FLOAT SWITCH MS 1
Item no.: 2004593

Float switches for level control devices as min./max switches for fluids that are aggressive or contain faeces, floats with the fluid and switches when tilted. Because of its construction and switching point, the float switch can exhibit only a very small hysteresis. This property cannot be changed, not even the length of the cable. In order to use the float switch, a switchgear with adjustable run-on time must be used. Switching: up "ON"/down "OFF"
Float switch WA KR1 S
Item no.: 6082807

As a signal transmitter for the system switching, depending on the level of an open container or a cistern.
Switching points: up ON / down OFF