1
replacement option found
Existing pump - Multistage
Brand
DAB (Jet)
Product name
Aqua Block Jet 45/100 T-100
Mains connection
3x400 V
Pipe Connection
Rp 25
Nominal power P2
1,85 kW
Replacement pump Exchange sheet
Product name
HMC 605 3~
Item no.
2550617
Mains connection
3x400 V
Pipe Connection
Rp 25
Rated Current
2,8 A
Nominal power P2
1,1 kW
Comment
Possible modification of installation, replacement pump has compliant connection diameter.
The replacement pump has a patented suction design, which means quiet operation and higher capacity. All fluid-affected parts are made of non-corrosive material.
The replacement pump is equipped with a 50 liter pressure tank.
Product information
HMC 605 3~
HMC 605 3~
Item no.
: 2550617
Your advantages
- Ideal system for supplying water throughout the building
- Low-noise due to multistage design
- Outstanding self-priming capability due to innovative priming wing
- All parts in contact with the fluid are corrosion-free
- Reduction of switch-on frequency and avoidance of fluid hammer, thanks to 50 l diaphragm pressure vessel
Self-priming water-supply unit .
Application
- Water supply
- Sprinkling
- Irrigation and spraying
- Pumping water from wells and out of tanks lying at greater depths
- Directly flanged motor
- Pressure switch
- Diaphragm pressure vessel (with replaceable diaphragm)
- Pump
- Pressure switch
- Pressure gauge
- Diaphragm pressure vessel (50 l)
- Pressure hose with steel casing and screwed connection
- Installation and operating instructions
- Mains connection 3~230/400 V, 50 Hz
- Suction head max. 8 m
- Max. inlet pressure of 4 bar
- Fluid temperature +5 °C to +35 °C
- Max. operating pressure 8 bar
- Pressure switch setting range 1-5 bar
- Protection class IP54
- Suction- and pressure-side connection Rp 1
- Pump housing made of 1.4301 stainless steel
- Impeller made of Noryl
- Shaft made of 1.4057 / 1.4404 stainless steel (1.1 kW)
- Mechanical seal made of carbon/ceramic
- Stage chambers made of Noryl
- Seal made of NBR
