2 replacement options found

Existing pump - Multistage

Brand DAB (Jet)
Product name Aquajet 102 M-60
Mains connection 1x230 V
Pipe Connection Rp 25
Nominal power P2 0,75 kW

Replacement pump Exchange sheet

Product name HWJ 50 L 204 (IE2) 1~
Item no. 4265555
Mains connection 1x230 V
Pipe Connection Rp 25
Rated Current 5,3 A
Nominal power P2 1,0 kW

Comment

Possible modification of installation, replacement pump has compliant connection diameter.
Replacement pump has pump housing made of stainless steel.

Product information
HWJ 50 L 204 (IE2) 1~

HWJ 50 L 204 (IE2) 1~
Item no. : 4265555

Your advantages
  • Ideal for outdoor applications (hobby, garden)
  • Rust-free stainless steel prevents corrosion, even with prolonged service life
  • Reduction of switch-on frequency and avoidance of fluid hammer, thanks to diaphragm pressure vessel with 20/50 l capacity
  • Electrical and hydraulic connections already in place, quick and safe to install
Construction
Self-priming water-supply unit .

Application
  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of tanks lying at greater depths
Equipment/function
  • Directly flanged motor
  • Pressure switch
  • Diaphragm pressure vessel (with replaceable diaphragm)
  • Connection cable with plug
  • Thermal motor protection switch
Scope of delivery
  • Pump
  • Pressure switch
  • Pressure gauge
  • Diaphragm pressure vessel (20/50 l)
  • Pressure hose with steel casing and screwed connection
  • Installation and operating instructions
Technical data
  • Mains connection, 1~230 V, 50 Hz
  • Suction head max. 8 m
  • Max. inlet pressure of 1 bar
  • Start-up pressure 1.5 bar
  • Variable switch-off pressure
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IP44
  • Connection on pressure side Rp 1
  • Suction-side connection G 1
Materials
  • Pump housing made of 1.4301 stainless steel
  • Impeller made of 1.4301 stainless steel
  • Shaft 1.4005 stainless steel
  • Mechanical seal made of carbon/ceramic
  • Stage chambers made of Noryl
  • Diffuser/injector made of Noryl
  • Seal made of NBR

Replacement pump Exchange sheet

Product name Initial Jet System 4-4-50
Item no. 4168024
Mains connection 1x230 V
Pipe Connection Rp 25
Rated Current 5,0 A
Nominal power P2 0,75 kW

Comment

Possible modification of installation, replacement pump has compliant connection diameter.

Product information
Initial Jet System 4-4-50

Initial Jet System 4-4-50
Item no. : 4168024

Your advantages
  • Automatic switching on and off, 2 tank sizes
  • Reduction of switch-on frequency and avoidance of fluid hammers
Construction
Self-priming water-supply unit. 

Application
  • Water supply
  • Sprinkling
  • Irrigation and spraying
  • Pumping water from wells and out of tanks lying at greater depths
Equipment/function
  • Directly flanged motor
  • Pressure switch
  • Diaphragm pressure vessel
  • Single-phase motor
  • Connection cable with plug
  • Thermal motor protection switch
Scope of delivery
  • Pump
  • Connection cable (2 m) with plug
  • Pressure switch
  • Pressure gauge
  • Diaphragm pressure vessel (20/50 l)
  • Pressure hose with steel casing and screwed connection
  • Installation and operating instructions
Technical data
  • Mains connection 1~230 V, 50 Hz
  • Negative suction head max. 7 m
  • Inlet pressure max. 2 bar
  • Start-up pressure 1.5 bar
  • Variable switch-off pressure
  • Fluid temperature +5 °C to +35 °C
  • Max. operating pressure 6 bar
  • Protection class IPX4
  • Connection on pressure side Rp 1
  • Suction-side connection G 1
Materials
  • EN-GJL 200 grey cast iron pump housing
  • Impeller made of 1.4301 stainless steel (AISI 304); apart from Jet 3-4: Noryl
  • Shaft made of C10 / AISI 304 stainless steel
  • Mechanical seal made of ceramic/carbon + NBR + AISI 304
  • Diffuser/injector made of Noryl
  • Seals made of NBR
  • Tank made of steel FE P04
  • CW617N brass pressure switch