1 replacement option found

Existing pump - Multistage

Brand Grundfos
Product name CM10-1 A 3~
Mains connection 3x400 V
Pipe Connection Rp 40 / Rp 40
Nominal power P2 0,65 kW
Distance floor - center 100 mm

Replacement pump Exchange sheet

Product name Medana CH1-LC.1002 3~
Item no. 4233383
Mains connection 3x400 V
Pipe Connection Rp 40 / Rp 32
Rated Current 2,7 A
Nominal power P2 1,1 kW
Distance floor - center 90 mm

Comment

Possible modification of installation, replacement pump has deviating connection diameter.
Replacement pump has higher capacity.
If you are pumping chilled water media or special material requirements, please contact Wilo Technical Inside Sales. Always consult Wilo when pumping media other than water.

Product information
Medana CH1-LC.1002 3~

Medana CH1-LC.1002 3~
Item no. : 4233383

Your advantages
  • High efficiency thanks to high hydraulic output
  • Highly reliable and robust with low noise emissions thanks to neck ring and corrosion-resistant lantern with cataphoretic coating
  • Suitable for use in ambient temperatures of up to 50 °C – which means an expanded field of application for solar panels, especially for system integration
Efficient system integration
 Wilo-Medana CH1-LC with its robust pump housing offers high reliability and, with its corrosion-resistant components, a large field of application for integration in larger systems even at ambient temperatures of up to 50 °C. The non self-priming, multistage pump achieves maximum hydraulic output.

Construction
Non self-priming horizontal multistage pump.

Application
  • Water distribution and boosting
  • Irrigation
  • Industrial process
Equipment/function
  • Pump in block design
  • Threaded connection
  • Single-phase or three-phase AC motor
  • Single-phase motor with integrated thermal motor protection
Scope of delivery
  • Pump
  • Installation and operating instructions
Technical data
  • Mains connection 1~230 V (±10 %), 50Hz
  • Mains connection: 3~230 V-400 V (±10 %), 50 Hz; 265-460 V (±10 %), 60 Hz
  • Fluid temperature of -20 to +90 °C
  • Max. operating pressure 10 bar
  • Max. inlet pressure 6 bar
  • Protection class IP55
  • Nominal diameters of pipe connections: from Rp1” to Rp 1 1/4”depending on type
Materials
  • Impellers, stage chambers and pump housing made of 1.4301/1.4404 stainless steel
  • Shaft 1.4301 or 1.4404 stainless steel
  • Seal EPDM
  • Mechanical seal: EPDM version: B-carbon/silicon carbide;
  • Bearing tungsten carbide/aluminum oxide
  • Pump base and pump housing EN-GJL-250